Office chairs are the first thing to consider when setting up your office. A well-maintained office chair with a fresh look improves your posture and gives the office a new look. With time, the bonded leather cover on the office chair is fading. It will affect your chair’s appearance.
We will describe simple techniques to reupholster your office chair so you can save money without compromising on your chair. This guide will focus on How to reupholster a desk chair easily.
How to reupholster a desk chair – Materials Needed:
To embark on this reupholstering journey, gather the following materials:
- 2 yards of home decor fabric (amount may vary based on chair size)
- Stanley Heavy-Duty Staple/Brad Nail Gun with Heavy-Duty Staple & Brad Assortment (2500-Pack)
- Glass Head Multicolor Pins (150-Pack)
- Coordinating upholstery thread or regular thread
- Upholstery Needle Kit
- Upholstery Nailhead Trim, Antique Gold (5-Yard)
- Staple Lifter
Cost Considerations:
If you already have the necessary tools, the fabric, thread, and decorative trim will cost approximately $25. Additional costs may arise if you need to purchase tools, but keep in mind that the staple gun, pins, and upholstery needles can be reused for other projects. The staple lifter is optional, and alternatives like pliers or an office staple remover can be used.
>> Read Also: Folding Chair Storage
How to Take Your Office Chair Apart:
The disassembly process will vary depending on your chair type. For the chair, four screws underneath needed removal to detach the wheels. Save any Allen wrenches used during the initial chair assembly for potential future disassembles.
How to Reupholster an Office Chair: Steps to follow
Follow these steps for a successful reupholstering process:
- Keep tools and screws in a small container to prevent loss during the project.
- Assess the holes where the wheels were attached to the seat cushion,
- Taking apart your office chair may vary depending on its design, but here’s a general guide based on a typical chair disassembly:
- Identify Screw Locations:
- Locate the screws holding various parts together. For wheels, check underneath the chair. In this case, four screws held the wheels in place.
Gather Tools:
Use suitable tools like Allen wrenches to remove the screw. Keep your tools safe and come along with furniture for future use.
Save Allen Wrenches:
Save Allen wrenches from initial furniture assembly projects; they might be needed for disassembly. Ensure you have the right size for your chair.
>> Read Also: How Much A Good Office Chair Cost
Use a Container:
Keep all tools, screws, and small parts in a container to prevent them from getting lost. This is crucial for multi-day projects to ensure everything is accounted for.
Wheel Removal:
If your chair has wheels, use the Allen wrench to remove the screws underneath. Save the screws in the container for reassembly.
Labeling and Documentation:
Some chairs may have helpful labels on the inside, indicating specific parts. Take advantage of these labels for easier reassembly.
If your chair lacks labels, take plenty of pictures before disassembling. This documentation ensures you have a reference for how it looked before the process.
Removing Decorative Screw Covers:
For parts like arms, check for decorative screw covers. These can usually be easily removed by wedging a fingernail underneath.
Once removed, access the screws holding the arms in place.
Document Arm Screws:
Identify and document the number and location of screws holding arm cushions. In this case, there were three screws holding each arm to the seat cushions.
Look underneath the arms for additional screws holding cushions, and remove them.
Taking your office chair apart requires careful attention to detail and organization. By following these steps, you can successfully disassemble your chair for any necessary repairs or reupholstering projects. Remember to store all tools and screws securely for the reassembly process.
>> Read Also: How To Buy A Good Home Office Desk
Attaching Arm Cushions After Disassembly
Underneath the Arm:
- Locate two screws underneath the arm that are holding the arm cushions in place.
Removing Cushions:
- Unscrew and remove the cushions from the arms for reupholstering or other modifications.
Preparing Cushions:
- Prepare the cushions for reattachment. Below, you can see the top cushion is finished, and the bottom cushion is ready for pinning and stapling.
Staple Size:
- Use 1/4″ staples for securing the fabric during reupholstering. While they seem to be holding well, consider using slightly longer staples if needed.
Pinning and Stapling:
- Pin the fabric onto the cushion, ensuring it’s taut and smooth. Then, use the staple gun to secure the fabric in place. Repeat until the entire cushion is covered.
Completed Cushion:
- After stapling, the cushion is ready for reattachment. The fabric should be securely held, providing a fresh and updated look.
Reattaching the Cushion:
- Once both top and bottom cushions are ready, reattach them to the arm. Align the cushions with the screw holes and secure them back in place using the screws removed earlier.
Final Result:
Your finished cushion is now securely reattached to the arm, completing the reupholstering process. Enjoy the refreshed appearance of your office chair!
>> Read Also: How Long Should You Stand AT A Standing Desk
Reupholstering Office Chair Seat and Back Cushions
Seat Cushions: Tacking Down Fabric:
Since the seat cushions were tufted, tacking down fabric in the four defined areas of the rectangle in the middle is crucial. This prevents the fabric from ripping over time due to stretching.
Place the fabric over each cushion, mark the spots to be tacked down with pins, and use a curved upholstery needle with matching thread to sew through each spot.
Hand Tacking:
Hand tacking may not be very noticeable but aids in draping the fabric nicely. It ensures the fabric stays securely in place over time.
Pin and Staple Technique:
For the bottom seat cushion, pull the fabric to the back and pin it in place before stapling.
Trace the outline of each seat cushion roughly onto the fabric, leaving about 5-6 inches of excess around. This ensures there’s enough fabric to cover the sides and reach the back.
Pleat the fabric evenly around each corner, pin close to the edge of the back, and leave pins in while stapling after pulling the fabric tight.
Cutting for Screw Holes:
Each seat cushion may have screw holes on the side, which need to be cut out after adding the fabric. Precision is not critical here, as these cuts will be covered when reattaching the arms.
>> Read Also: How To Organize Your Workstation On A Corner Desk
Top Seat Cushion (Back Cushion):
Challenges of Reupholstering the Top Seat Cushion:
The top seat cushion, being visible, requires more care in reupholstering, as most of this section may be padded, making staples prone to pulling out easily.
Folding Fabric Along the Edge:
Carefully fold the fabric along the edge of the previous seam, ensuring a neat and concealed appearance.
If the back of the cushion is in good condition, you may choose to leave it as is.
>> Read Also: How To Sit At A Computer
Pinning and Sewing:
Pin the fabric in place slightly overshooting the previous seam and use a curved upholstery needle with coordinating thread to sew it in place.
Ensure the sewing is neat and secure, especially since this part of the cushion will be visible.
Final Look:
After sewing, assess the appearance. Depending on your preference, you might choose to leave it as is or consider additional finishing touches.
FAQs!
Q-1 Can a desk chair be reupholstered?
Yes, it’s surprisingly easy to reupholster a desk chair, and doing so can give your chair a total makeover, whether the fabric is deteriorating or you simply want a fresh, vibrant look.
Q-2 How easy is it to reupholster a chair?
Reupholstering a chair is considered one of the simplest DIY tasks, especially for beginners. If the chair’s structural components are in good condition, changing its look can be done with minimal effort.
Q-3 Is it worth reupholstering an office chair?
Yes, it’s worth reupholstering an office chair if the upholstery is worn out. Refurbishing the fabric not only enhances aesthetics but also improves comfort and hygiene, providing a fresh and inviting appearance to your workspace.
Q-4 How much fabric is needed to reupholster a chair?
As a general rule, using 54″ wide fabric, 3/4 yard is sufficient for two chairs. The fabric requirement increases proportionally based on the number of chairs you plan to reupholster.
Q-5 Is a fabric office chair good?
Yes, fabric office chairs offer a balanced combination of comfort, style, and functionality. They are an excellent choice for various work environments, promoting productivity and overall well-being, whether used in a home office or a professional setting.
How to reupholster a desk chair.- Wrapping up!
This is all about How to reupholster a desk chair. The process is easy and brings new life to your office chairs. Follow the process, select a suitable fabric, disassemble the chair, and then skillfully sew the fabric. With this process, you make your chair like a new one. It is a cost-effective solution as compared to buying a new one.
